A. W. Colombo, S. Karnouskos, Y. Shi, S. Yin, and O. Kaynak, “Industrial cyberphysical systems [scanning the issue],” Proceedings of the IEEE, vol. 104, no. 5, pp. 899–903, may 2016.

Joint Papers by EMTC Members

A Novel Harmonic Isolation Method for the Reliable Detection of Rotor Breakages in Induction Motors

Jose A. Dabiu, Konstantinos N. Gyftakis, Spain, Greece

Homopolar Rotor Slot Harmonics for Inter-Turn Fault Detection in Induction Motors

Lucia Frosini, Konstantinos N. Gyftakis, Italy, Greece

A Mathematical and Dynamical Model for Analyzing H-Shaped PM Vernier Motor for Electric Motorcycle Mid-Drive Applications

Jawad Faiz, Mohammad Sedigh Toulabi, Iran

Replacing Copper With Aluminum in Hairpin Windings Motors Intended for Utility Cars

Stefano Nuzzo; Davide Barater; Tianjie Zou; Shafigh Nategh, Italy, Sweden

Active Short Circuit Tolerant Design of Permanent Magnet Assisted Synchronous Reluctance Machines

Chris Gerada, Tianjie Zou, China, U.K.

Optimization and Comparison of 1 MW-Class PM Motors for Aircraft Propulsion Using Litz Wire and Hairpin Windings

Chris Gerada, Tianjie Zou, China, U.K.

Automatic Detection of Corrosion in Ball Bearings of Soft-Started Induction Motors Using the Persistence Spectrum of the Stray-Flux Signals

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

A Novel Harmonic Isolation Method for the Reliable Detection of Rotor Breakages in Induction Motors

Jose A. Daviu, Konstantinos N. Gyftakis, Spain, Greece

Holistic Design Optimization of 350 kW High-Speed Permanent Magnet-Assisted Synchronous Reluctance Machine for Heavy-Duty Electric Vehicle

Chris Gerada, Tianjie Zou, China, U.K.

Continuous Hairpin Winding Technology for Electric Machines Enabling Net Zero Transportation: A Comprehensive Review

Chris Gerada, Tianjie Zou, China, U.K.

Predictive Control of Five-Leg Inverter Driving Dual PMSMs for Overcurrent Suppression

Zaixin Song, Chunhua Li, Hong Kong

Modeling and Analysis of a Novel Step Skew Crossed Teeth Transverse Flux Motor for Distributed Electric Propulsion System

Zaixin Song, Chunhua Li, Hong Kong

A Sinusoidal-Driven Wireless Integrated Single-Phase Induction Motor

Zaixin Song, Chunhua Li, Hong Kong

Condition Monitoring of Electric Motors Based on Multiquantity Analysis Under Transient Regimes

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

Eccentricity Fault Diagnosis in Permanent-Magnet Synchronous Motors Using the Stray Flux Vector

Jose A. Daviu, Luca Zarri, Spain, Italy

Power Take-Off Electrification Through Power Flow Analysis of a Specialized Tractor

Davide Barater, Stefano Nuzzo, Italy

Advanced Startup Current Analysis for the Detection of Broken Outer Bars in Dual-Cage Induction Motors Considering Bar Materials

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

Corrosion Damage Detection in Induction Motor Bearings Using Ensemble Learning Algorithms and Data Fusion

Jose A. Daviu, Israel Zamudio-Ramirez, Spain

Load-Related and Eccentricity Fault Diagnosis in Induction Motors Using Decision Tree and Genetic Algorithms

Jose A. Daviu, Israel Zamudio-Ramirez, Spain

Induction Motor Bearing Fault Diagnosis Using Taylor-Fourier Filters on Stray Flux Signals

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

Synchronous Machine Salient Pole FRA Signature Modelling via Hybrid Methodology

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

High-Frequency Numerical Modelling for Impedance Frequency Response in Electrical Machine Stator Coils – A Comparative Study

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

A Novel Visualization Methodology for Characterizing Magnetic Flux Sensors in Induction Motors: Discrimination Properties Insights

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

Bearing Fault Analysis in Synchronous Reluctance Motor Through the Analysis of Statistical Indicators

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

Stray Flux Signal Analysis for Bearing Fault Detection in Induction Motors: A Chaos-Based Approach

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

Impedance Sweep Frequency Response Analysis for the In-Situ Inspection of Distributed Stator Windings in Induction Motors

Jose A. Daviu, Jose E. Ruiz-Sarrio, Spain

Comparison between Aluminum and Copper Hairpins on the Torsional-Flexural Instability Phenomenon in the Bending Process

S. Nuzzo, Tianjie Zou, Italy, UK

Structural Investigations on Yokeless Electrically-Excited Segmented Armature Axial Flux Motor

Shafigh Nategh, Stefano Nuzzo, Sweden, Italy

Variable-Temperature PMSM Dynamic Model Based on Spline Interpolation of Coenergy Map

S. Nuzzo, D. Barater, Giovanni Franchescini, Italy

Analytical-FE Study of Rotor-Dependent Hairpin Conductor Sizing in High-Performance IPMSMs

S. Nuzzo, D. Barater, Italy

System Level, Comparative Loss Evaluation of Interior Permanent Magnet Drive with Traditional and Predictive Control Strategies

S. Nuzzo, D. Barater, Gregorio Cutuli, Italy

Slot Opening Influence on Short Circuit Current: A Sensitivity Analysis

S. Nuzzo, D. Barater, Gregorio Cutuli, Italy

Fuzzy Logic-Based Energy Management Strategy for a Hybrid Specialized Tractor

S. Nuzzo, D. Barater, Italy

Inlet Placement Influence on Thermal Performance of an Oil-Cooled Traction Motor

S. Nuzzo, D. Barater, Italy

Experimental Investigation of Li-ion Cylindrical Cell Thermal Response Through Heat Flux Measurement

S. Nuzzo, D. Barater, Italy

Design of Asymmetric Permanent Magnet Rotor for Efficient Material Use in a PMSM for High Performance Automotive Applications

Shafigh Nategh;Andreas Carlsson, Sweden, Italy

Development of Sustainable Slot Liners for 800 V+ Oil-Cooled Electrical Machines for Passenger Cars

Shafigh Nategh;Jahirul Islam, Sweden

A Comparative Study of Single-Rotor and Dualrotor Radial Flux Electric Machines for Centraldrive BEVs

Shafigh Nategh;Andreas Carlsson;Aldo Boglietti, Sweden, Italy